Welcome to Guangzhou Li Yan Tian CO.,LTD 

  • WeChat li yan tian
  • Advisory
  • +86-2082327526/82181507

News
center

Service hotline:

+86-2082327526
+86-13711528526

4Industry

Reflective car stickers paste requirements


The use of reflective materials is becoming more and more widespread in life. As people begin to understand their advantages, they have developed and developed in many ways. The retroreflective function of light is an important principle of reflective materials. Reflective car stickers are an important use of reflective materials in the traffic sign industry. The main function of reflective car stickers is to reduce the occurrence of accidents and improve the safety of driving. When attaching reflective car stickers, you need to pay attention to some requirements.
Different grades of body reflective marking materials should not be applied to the rear of the vehicle at the same time. When using a primary body reflective marking material, the sum of its area with the rear reflector should be greater than or equal to 0.1m2; when using a secondary body reflective marking material, the sum of its area with the rear reflector should be greater than or equal to 0.2m2.
The rear body reflective logo should reflect the width and height of the rear of the vehicle as much as possible. The horizontal body reflective logo should reflect the width of the rear of the vehicle. The vertical body reflective logos along the sides of the rear should reflect the height of the rear of the vehicle. Corner intersections should be white cells. Some trucks with a total mass of less than or equal to 4,500 kg can be crossed in red and white because the structure of the rear cargo compartment cannot meet the requirements for the intersection of white units.
The sticking of the side body reflective logo is allowed to be interrupted, but the total length (excluding the space) should be greater than or equal to 50% of the vehicle length, the length of each continuous segment should be 300 mm or more, and at least one of the red and white body reflective logos should be included For units, the interval for pasting the reflective marking material of the secondary body should be less than or equal to 150mm, and the interval for pasting the reflective marking material of the primary body should be less than or equal to 300mm.
Flat trucks, flat trailers, low flat trailers, and container trailers are examples of secondary body reflective labeling materials. If the rear of the flat panel cannot be pasted, two rows of body reflective labels should be pasted horizontally and side by side on the rear lower protective device. 0.2m2 or more.
The main function of reflective car stickers is to improve the surface performance of traffic signs, so that they can meet the traffic needs of all-weather conditions, and improve road safe operating conditions. Reflective film is a layer structure composed of multiple layers of different performance materials. Different reflective films have different layer structures.